Calls

Call

This telephone is 4G, and is capable of connecting to 2G, 3G and 4G mobile networks. This allows you to have better mobile coverage. In addition, on 4G networks it supports HD, High Definition voice, which represents a significant improvement in the quality and clarity of telephone conversations.

It also has the Vocal Dialing function, vocally repeating the dialled numbers for better identification. By default it is enabled. Check the Settings section to turn it off.

Another advanced feature of the telephone is HAC, Hearing Aid Compatible. Hearing Aid Compatible Reduces interference often caused by telephones in hearing aids, and is also compatible with hearing aids with a "T" (inductive loop) position. This feature is always active on calls.

To make a telephone call, when using two SIM cards, the telephone will request confirmation of the SIM card with which to make the call.

During a call, you can make and receive more calls from/to the same number, but you cannot make or receive calls from the other SIM card.

mceclip0.png

1. Dial the number you want to call.

2. Press “Delete” to delete incorrectly entered digits.

3. Pressmceclip1.pngand select the SIM card with which you want to make the call. Pulsamceclip2.png.

4. When you make the call, if the number is stored in the phone book, the name of the contact and its icon will appear on the display.

5. Pressmceclip3.pngto end the call.

mceclip0.png

Call a contact from the phonebook

1. Press "contact list" from the home screen using the right function key. The display will show the list of contacts in alphabetical order.

2. Use the up/down keys to scroll through the list to the desired contact.

3. Press the call keymceclip2.pngto call the selected contact.

4. Press the end call keymceclip4.pngto end the call.

Agenda.jpg

Call a photo contact

1. Press "Menu” -->“Photo Contacts”. The screen will show the first defined contact.

2. Use the up/down keys to scroll through the list to the desired contact.

3. Press the call keymceclip2.pngto call the selected contact.

4. Press the end call keymceclip4.pngto end the call.

 

Call from the log

1. With the telephone in standby, press themceclip2.pngkey to call the selected contact. You can also access the log from the main menu, via “Calls"

2. Use the navigation keys to scroll through the list, select a record and pressmceclip2.pngto call.

 

Make a call with speed dial: 

For speed dialing, the telephone has three direct memories and eight indirect memories.

Direct memories (favourite numbers) are accessed via the M1 and M3 keys. To configure these memories, go to Menu --> Settings --> Speed dial, or long press on the unconfigured key. Activate the function, and enter the numbers.

Indirect memories or speed dial numbers are those that are activated by pressing and holding one of the digits 2 to 9. To configure these numbers it is necessary to have a SIM card installed and go to Menu -> --> Settings --> Speed dial or press for a while on the unconfigured key, and configure the desired numbers. Number 1 is reserved for voicemail.

 

Answer/reject a call

When you receive a call, the number or name and icon will be displayed on the external screen if you have it closed, or on the internal screen if you have it open. Press the mceclip2.pngto answer ormceclip4.pngto reject the call.

 

During call

During the conversation, press “Speaker“ to activate hands-free mode. Pressing it again returns to normal mode.

During the conversation, press “Menu“ to access the various options::

  • Connect Bluetooth headphones
  • On hold, put the call on hold
  • Start recording
  • Mute the microphone
  • Adjust call volume
  • Contact list
  • Calls
  • Messages

Missed calls indicator

If you have one or more missed calls, a notification message will appear on the screen and an informative icon at the top of the screen. Accessing Menu>Calls>Missed calls, these calls are displayed.

Was this article helpful?

11 out of 22 found this helpful

Have more questions? Submit a request