1. Stick the guide sticker on the wall.
2. Make two holes with a diameter of 5mm. Be careful with the cables and that dust does not get into the meter!

3. Insert the plastic plugs into the holes and screw in the screws from the mounting kit until they protrude by about 5mm
4. Line up the screws with the guides on the meter to hang it up.

Place the bracket on the guides on the back of the meter and slide them all the way into place. Make sure the meter is on a stable surface and that nothing is preventing correct air circulation.


Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request