BLUETOOTH MODE
WHAT PROFILES AND COMPATIBILITIES DOES YOUR SPC SOUND GO HAVE?
Your SPC SOUND GO supports a version of Bluetooth 5.0 with the following profiles:
- Advanced audio distribution profile (A2DP). It allows transmission of stereo audio signals.
- Advanced audio distribution profile (AVRCP). It is used to send commands from a speaker to a Bluetooth player, for example an MP4 or smartphone.
- Hands free profile (HFP), designed to control a mobile ‘phone from a fixed hands free unit in the car.
- Headset profile (HSP), offers the basic functions necessary for communication between a mobile ‘phone and a speaker.
FIRST PAIRING
Using a music player with a Bluetooth connection (smartphone, tablet, MP3, MP4...) you can listen to your music through your SPC SOUND GO.
To make a new connection with your SPC SOUND GO via Bluetooth, you will have to activate the Bluetooth connection on both your SPC SOUND GO and your audio player. Once these connections are activated you will have to search for your SPC SOUND GO in the list of Bluetooth devices detected by your audio player in the Bluetooth menu. After selecting your SPC SOUND GO, the speaker will emit an established connection sound.
WHAT CONTROLS DO I USE IN BLUETOOTH MODE?
The Bluetooth playback mode controls are as follows.
remove: Press to reduce the volume and hold for next song.
add: Press to increase the volume and hold for previous song.
play_arrow: Pause playback. Press it again to resume playback.
HANDS-FREE FUNCTION
If you connect a smartphone to your SPC SOUND GO via Bluetooth, you can answer/reject calls thanks to the built-in microphone.
Press the play_arrow button once to answer the call. Press it again to hang up.
Hold down the play_arrow button for two seconds to reject the incoming call.
Press the play_arrow button twice to call the last dialled number again.
AUX MODE:
Using the 3.5mm jack cable included with your SPC SOUND GO you can connect any audio player that has this audio output. Connecting your player and your SPC SOUND GO, using the 3.5mm jack cable you can listen to the music stored on your music device.
The auxiliary mode playback controls are as follows:
remove: Press to decrease the volume and hold for previous song.
add: Press to increase the volume and hold for next song.
play_arrow: Pause playback. Press it again to resume playback.
These actions may not work depending on the APP or device to which the cable is connected.
MICRO SD CARD MODE:
If you insert a micro SD card into your SPC SOUND GO, you can play your songs in WAV or MP3 format.
The Micro SD mode playback controls are as follows:
remove: Press to reduce the volume and hold for next song.
add: Press to increase the volume and hold for previous song.
play_arrow: Pause playback. Press it again to resume playback.
Some features may not be available on cards.
TWS CONNECTION:
Your SPC SOUND GO supports TWS (True wireless) connection, which allows two speakers to be linked together to play music in stereo.
- Speakers must be disconnected from any other devices before TWS pairing.
- Turn on the 2 SPC SOUND GO and keep them close.
- Select one as the main one and hold down the play_arrowbutton for 2 seconds. Upon successful pairing, you will hear a notification and the second speaker's status light will be constant.
- Now your speakers will connect to each other automatically every time you turn them on.
- Turn on bluetooth on your device and select SPC SOUND GO from the list to link to the speaker.
- Upon successful pairing, one speaker will play the left channel and the other the right channel for stereo sound.
- Control buttons can be used on either speaker. By adjusting the volume on one of them, you will adjust it on both simultaneously..
Unlink TWS: Hold play_arrowfor 5 seconds on one speaker to disconnect them from each other.