Lift up the battery cover using the tab located at the bottom of the phone, and remove the battery by lifting from the notch located at the top of the battery compartment.
Insert the SIM card(s) (MiniSIM format) in the indicated position, lining up the gold contacts of the phone and the card(s).
If applicable, insert the Micro SD memory card in the indicated position.
Insert the battery by matching the gold contacts on the phone and the battery.
To charge the terminal, connect the power adapter to the charging base. Check the orientation of the connector and do not force the connection if it does not connect immediately.
You can also connect the adapter to the telephone's USB C connector located at the bottom of it. As before, check the orientation of the connector and do not force the connection if it does not connect immediately.
Before you start using it, remember to remove the screen protector.
Power key for a few seconds to turn on the telephone. Enter the PIN that appears on your SIM card. If two SIM cards are inserted, the telephone will ask for the PIN of SIM 1 first and then SIM 2.
Press and hold this key to turn the telephone off.
NOTE: The personal identification number (PIN) protects the SIM card from unauthorised use. The PIN unlocking key (PUK number) allows you to unlock a blocked PIN. The PIN and PUK are provided with the SIM card. For more details, contact your operator
Was this article helpful?
8 out of 10 found this helpful
Have more questions? Submit a request