Battery and charging


1 - Connect the adapter provided in the box into any socket in your home. Connect the other end of the power supply to the phone connector     for charging the battery.

2 - When connecting and disconnecting the charger, the corresponding notification will appear on the screen. During charging, if the screen is activated, the battery icon will indicate that charging is in progress.


Important charging information

To fully charge the battery, it is necessary to put it on charge for about 2 hours.

For good maintenance and to extend the life of the battery, it is not recommended that the battery remains fully charged or with a very low charge for a long time. It is better with an intermediate level of charge. It is recommended not to leave the telephone charging for long periods of time (holidays, etc.). It is better to completely discharge the battery occasionally.

If the telephone is not used for a long time, remove the battery with an intermediate level of charge.
If the battery has not been used for an extended period of time or if it is depleted, the display of the telephone may not work when the battery is recharged. Once the battery has been charging for a while, you can turn the telephone on to use it.


Low battery warning

When the battery is about to run out, the battery indicator will be empty, the telephone beeps and displays a message. You must connect the power supply to charge the battery.
If the telephone is uncharged the battery will turn off, and you will not be able to make or receive calls.

Was this article helpful?

3 out of 6 found this helpful

Have more questions? Submit a request