If you are one of those people who programs the thermostat by time slots and you want the temperature at the programmed time to be ideal, the SPC Hesta has a function that has been developed for you.
This function allows the start command to be given to the thermostat with the necessary anticipation so that at the programmed time the temperature is as desired.
To be able to enter this mode, you must first enter Standby mode by holding the button pressed until that the display shows “OFF”; then press and hold the button
for 4 seconds.
Then you will need to navigate to the eighth setting that the thermostat allows with the button. The display will show the following:
You can modify it with the and
arrows.
Once the adjustment is finished, just press the button to save changes and exit advanced settings.