If you think that the temperature shown on the display does not match with the temperature of the room the device is in, your SPC Hestia has a function to compensate for this temperature drift.
For this, you will only have to access the advanced settings of the device.
To be able to enter this mode, you must first enter Standby mode by holding the button pressed until that the display shows “OFF”; then press and hold the button for 4 seconds.
The display will show the following:
This first modifiable field corresponds to the compensation between the temperature measured and the actual temperature, with a variation margin of -4 °C/+ 4 °C which is configurable with the y arrows.
Adjust it taking into account the temperature it measures and compensate for it to be able to show the temperature that you consider to be the real one.
Once the adjustment is finished, just press the button to save changes and exit advanced settings.