Installation and first use

mceclip0.png

Lift up the battery cover and battery, using the tab located on the   bottom of the phone and on top of the battery compartment.

mceclip1.png

mceclip6.png

Insert the SIM card(s) by matching the gold contacts on the phone   and the card(s).

Insert the battery by matching the metal contacts on the telephone and the battery.

mceclip2.png

To charge the terminal, connect the power supply to the phone's micro USB connector   located on the bottom of it. Check the orientation of the connector   and don't force the connection if it is not immediate. 

mceclip3.png

You can also connect the power supply to the charger unit. As before, check the orientation of the connector and do not force the connection if it does not connect immediately.

mceclip4.png

Before you start using it, remember to remove the screen protector.

mceclip5.png

Press and hold the power key for a few seconds to turn on the telephone. Enter the PIN that appears on your SIM card. If two SIM cards are inserted, the telephone will ask for the PIN of SIM 1 first and then SIM 2.

Press and hold this key to turn the telephone off.

NOTE: The personal identification number (PIN) protects the SIM card from unauthorised use. The PIN unlocking key (PUK number) allows you to unlock a blocked PIN. The PIN and PUK are provided with the SIM card. For more details, contact your operator.

 

"

Was this article helpful?

8 out of 19 found this helpful

Have more questions? Submit a request