Installation and first use

Lift the battery cover using the tab on the bottom of the telephone, next to the charging contacts.

Remove the battery from the compartment.

Enter the SIM card (s) by lining up the gold contacts of the phone and the card(s). If you wish, you can also insert a microSD card (up to 16GB) into the TF slot as shown stamped on the case itself.

Insert the battery by matching the gold contacts on the telephone and the battery.
To charge the terminal, connect the supply to the charging base and to any socket in your home. Check the orientation of the connector and do not force the connection if it does not connect
immediately. Place the telephone on the charging dock.

Keep the on key pressed for a few seconds to turn on the telephone. Enter the PIN provided with your SIM card. If two SIM cards are inserted, the telephone will ask for the PIN of SIM 1 first and then SIM 2.

Keep this key pressed to turn the telephone off.

NOTE: The personal identification number (PIN) protects the SIM card from unauthorised use. The PIN unlocking key (PUK number) allows you to unlock a blocked PIN. The PIN
and PUK are provided with the SIM card. For more details, contact your operator.

Dial the number using the number keypad and then press this key to make the call.

 

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request