CHARGING
To charge the watch, connect the included charging cable to a standard USB power adapter (5 volts) and to the magnetic charging terminals of the watch, as shown in the figure:
Recommended power adapter: Input 100-240Vac, 50/60Hz; output 5V 1000mA.
While charging, briefly pressing the power button will display the battery icon with the fill status.
When it reaches 100%, the message "Full Charge" appears, and the battery icon is completely filled in green.
The estimated charging time with the recommended standard charger is less than 3 hours.
The battery status can be checked on the watch's status bar:
When the battery is low, an informative alert with vibration appears on the watch screen. This warning appears when the battery reaches 15%, 10%, and 5% levels.
Similarly, with low battery, the corresponding notifications are sent to the SMART YOU app informing the family member.
AUTONOMY:
Autonomy values depend largely on the watch's settings, activities, and functionalities performed. These values have been obtained according to the use:
- Autonomy in typical use is 3 days. Typical use: screen brightness at 50%, 1 GPS location per hour, Wi-Fi off, and daily: 5 minutes of screen activation, 1 minute of calls, 5 chat messages.
- Autonomy in intensive use is 2.5 days. Intensive use: screen brightness at 75%, 1 GPS location every 9 minutes, Wi-Fi on, and daily: 150 times screen activation, 4 minutes of calls, 1 video call of 2 minutes, 20 chat messages.
- In power-saving mode the autonomy is 4 days. Power saving: Typical use: screen brightness at 20%, Wi-Fi off, and daily: 100 times screen activation, 2 minutes of calls, 2 chat messages, 1 GPS location.